Digiplex DGP2-641R Manuel d'installation télécharger pdf (Page 6)

2 Reference & Installation Manual

1.1 Specifications

Power input: 9 to 16 VDC, 100mA maximum

PGM current limit: 50 mA

Number of inputs: 2

Power indication: Yellow LED on

Locate indication:

Green and yellow LEDs flash simultaneously

Combus fault

indication: Red and yellow LEDs flash alternately

Tamper Switch: Yes (also used to deactivate locate)

LCD: Super Twisted Nematic display (STN), wide

viewing angle, 2 lines of 16 characters, backlight

and contrast adjustable

Read Range*: CR-R700 ISO PosiCard - up to 10cm (4”)

CR-R704 Key Tag - up to 6cm (2.5”)

Frequency: Exciter field - 125 KHz Pulse Modulated

Receive Low Frequency - 12.500 KHz

Receive High Frequency - 15.625 KHz

Compatibility: Any DGP-NE96 control panel or DGP-848 control

panel V2.20ACC and higher

Specifications may change without prior notice.

* The specified read range assumes no electrical interference and that

the card is presented parallel to the reader, with the reader installed and

operated as outlined in this manual. The read range will vary depending

on the type of card used. The larger the card, the greater the read range.

The read range may decrease if the reader is mounted on metal.

DGP2641R_ei00.fm Page 2 Thursday, July 22, 2004 4:16 PM

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Pas de commentaire

Digiplex DGP2-641R Manuel d'installation Page 6