Digiplex DGP2-641R Manuel d'installation télécharger pdf (Page 29)

DGP2-641R LCD Keypad Module 25n

The DGP-NE96 control panel has up to 8 partitions, 96 zones and up to

999 user codes. This LCD keypad module only allows you to program the

messages for up to 4 partitions, 48 zones and 96 user codes. The rest of

the messages can be programmed directly into the DGP-NE96 control

panel. Refer to the DGP-NE96 Reference & Installation Manual and to

the DGP-NE96 Programming Guide for more details.

[STAY] - Insert Space

Pressing the [

STAY] key inserts a blank space in the current cursor

position.

[

FORCE] - Delete

Pressing the [

FORCE] key will delete the character or blank space found

at the current cursor position.

[

ARM] - Delete Until the End

Pressing the [

ARM] key will delete all characters and spaces to the right

of the cursor and at the cursor's position.

[

DISARM] - Numeric Keys / Alphanumeric Keys

Every time the [

DISARM] key is pressed it will toggle numeric keys to

alphanumeric keys and vice versa. Numeric: Keys [0] to [9] represent

numbers 0 to 9.

[BYP] - Lower Case / Upper Case

Every time the [

BYP] key is pressed it will toggle the case setting from

lower to upper case and vice versa.

[MEM] - Special Characters

After pressing the [

MEM] key, the cursor will turn into a flashing black

square. Using Table 2 on the following page, enter the 3-digit number

that represents the desired symbol.

DGP2641R_ei00.fm Page 25 Thursday, July 22, 2004 4:16 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Pas de commentaire

Digiplex DGP2-641R Manuel d'installation Page 29