Digiplex DGP2-641R Manuel d'installation télécharger pdf (Page 17)

DGP2-641R LCD Keypad Module 13n

4.9 Beep on Exit Delay

SECTION [004]: OPTION [2]

The keypad can beep once every second during the Exit Delay Timer.

During the final 10 seconds, it will beep more rapidly to provide a final

warning before the area is armed.

Option [2] OFF= Exit Delay beep disabled

Option [2] ON = Exit Delay beep enabled (default)

4.10 Chime on Zone Closure

SECTION [004]: OPTION [4]

During the Chime Zone Time Period that the user sets, the keypad can

emit an intermittent beep whenever a zone with the Chime feature

enabled closes (see DGP-848 or DGP-NE96 User Manual for details on

Chime Zones). If the user does not set the Chime Zone Time Period and

this option is enabled, the Chime Zones will always beep upon closure.

Option [4] OFF= Chime on Zone Closure disabled (default)

Option [4] ON = Chime on Zone Closure enabled

4.11 Beep on Trouble

SECTION [005]: OPTIONS [1] TO [4]

Potential troubles have been sorted into groups. With these options

enabled, the keypad will emit an intermittent beep tone whenever a trouble

condition from the Trouble Groups occurs in the system. The intermittent

beep will remain activated until the user enters the Trouble Display or if the

trouble is resolved. For a list of the troubles, see the

DGP-848 or DGP-

NE96

Reference and Installation Manual. The intermittent beep will be re-

initialized whenever the trouble condition re-occurs.

ption [1] OFF= Beep disabled: System Troubles and Clock Loss

Option [1] ON = Beep enabled: System Troubles and Clock Loss

DGP2641R_ei00.fm Page 13 Thursday, July 22, 2004 4:16 PM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Pas de commentaire

Digiplex DGP2-641R Manuel d'installation Page 17