Digiplex DGP2-641R Manuel d'installation télécharger pdf (Page 12)

8 Reference & Installation Manual

4.0 System Options

4.1 Partition Assignment

Section [001]: Options [1] to [8]

Each keypad in the system can be assigned to one or more

partitions. In section [001], options [1] to [8] represent partitions

1 through 8 respectively. To assign the keypad to a partition,

simply enable the option that corresponds to the desired

partition. By default, partitions 1 to 8 are enabled.

Section [001] options [5] to [8] can only be used if the

keypad is connected to a DGP-NE96 control panel.

4.2 Display Access Code Entry

Section [003]: Option [1]

The digits of the user access codes can be displayed on the LCD

screen when they are entered.

4.3 Display Exit Delay Timer

Section [003]: Option [2]

Based on the user's needs, an Exit Delay Timer will be

programmed to provide the user time to exit the partition before

the system is armed. The Exit Delay Timer's countdown can be

displayed on the LCD screen.

ption [1] OFF = Digits are replaced by a * (default)

Option [1] ON = Access Code digits will be displayed

Option [2] OFF= Will not display Exit Delay timer (default)

Option [2] ON= LCD screen will display Exit Delay timer

DGP2641-EI14.fm Page 8 Monday, February 20, 2006 9:35 AM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Digiplex DGP2-641R Manuel d'installation Page 12