Digiplex DGP2-641BL Instructions d'exploitation télécharger pdf (Page 19)

LCD Keypad 19

8.4 PROGRAMMING CHIME ZONES

8.5 PANIC ALARMS

Your system can be programmed to send an alarm to your Central Monitoring Station to request help from the

police, a medical facility, the fire department, or anyone you wish when you press a pre-determined combination of

buttons. To generate a panic alarm, simultaneously press and hold the button combinations displayed in Table 3 on

page 19. Your installer can program the alarm to be either silent or audible.

Table 3:

Panic Buttons

8.6 QUICK FUNCTION BUTTONS

9.0 TESTING AND MAINTENANCE

9.1 BURGLAR ALARM TESTING

Two people are needed to complete this test. One person will watch the LCD screen on the keypad while the other

person walks around the protected areas and opens the zones (i.e. opens the doors and windows that are

protected, walk in the path of the motion detectors, etc.). The LCD screen will display the opened zones, but if a

zone does not register, contact your Installer.

9.2 FIRE ALARM TESTING

Do NOT use an open flame or burning materials to test your fire detection devices. Your Installer will provide details

on the best way to test your system.

You can program the keypad

to emit a rapid, intermittent

beep tone whenever

designated zones are opened

or only when opened between

certain hours. These zones

are referred to as Chime

Zones. Your installer can also

program your Chime zones to

beep upon closure.

How do I program chime zones?

1) Enter your [ACCESS CODE].

2) Press the [9] button.

3) Press the [1] button to chime a zone. Then enter the

number corresponding to the zone to be chimed, or use

the

[

]

and

[

]

buttons to scroll the list of zones. Press

the

[ACC] button to chime or unchime the zone that

appears on the screen. Press

[

ENTER

]

to save.

Press the [2] button to set the time period a chimed zone

will beep. Enter the time that the chimed zone(s) will start

beeping when opened (HH:MM). Enter the time that the

chimed zone(s) will stop beeping when opened (HH:MM).

4) Press

[

CLEAR

]

to exit chime programming.

Panic Alarm Types

Buttons to be pressed and held

simultaneously

Emergency Panic Press & hold the [1] and [3] buttons

Auxiliary Panic Press & hold the [4] and [6] buttons

Fire Panic Press & hold the [7] and [9] buttons

You will only need to use the

Quick Function Buttons upon

your Installer’s or Central

Monitoring Station's request.

Only the System Master Code

or User Access Codes with

the Master feature enabled

will be able to access these

functions.

How do I access the Quick Function Buttons?

1) Enter your [

ACCESS CODE]

2) Press the [0] button.

3) Press the:

[

STAY] button to send a test report to the Central Monitoring Station.

[

FORCE] button to call the WinLoad software.

[

ARM] button to answer the WinLoad software.

[

DISARM] button to cancel communication with the WinLoad software.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Digiplex DGP2-641BL Instructions d'exploitation Page 19

Commentaires sur ces manuels