Digiplex DGP2-641BL Instructions d'exploitation télécharger pdf (Page 12)

12 System Manager’s Manual

5.4 PROGRAMMING USER ACCESS CODES

The System Master and Users with the Master feature can program User Access Codes with User Options and

Area Assignments. Figure 5.1 on page 12 describes the steps you would follow to program User Access Codes.

If the keypad emits a Rejection Beep at any point during the programming procedure, you may have chosen an

existing User Code or you do not have access to certain User Options (section 5.5) and Area Assignments (step 7

in Figure 5.1 on page 12). User’s with the Master feature can only assign User Options and Area Assignments that

they are assigned to. For example, if a User with the Master feature is assigned User Option 1 and Area 2, they can

only assign Options 1 and Area 2 to a User Access Code.

Figure 5.1: Programming User Access Codes

Enter your [ACCESS CODE] (System Master Code or User Access Code with Master

feature).

Press [0] to enter the Programming Menu.

From Programming Menu, press [

ACC].

Enter the 2-digit User Number you want to program; press the [T] button to scroll the

list of codes then press [

ACC] once the desired code appears on the screen.

Enter a User Code within the brackets. Press the [S] button to reach the User Options

screen.

NOTE: The User Code is a Personal Identification Number (P.I.N.).

Program the User Options by pressing the number on your keypad corresponding to

the User Option you wish to enable. The option is considered ON when the number

appears within the brackets

. Proceed to step 7 by pressing the [S] button. For a

detailed description of the User Options refer to section 5.5 on page 14

Options [1] and [2] : Master Feature

[1] OFF = Master Feature disabled.

[1] ON, [2] OFF = User can only modify User

Access Codes.

[1] ON, [2] ON = User has full Master rights.

User can create, modify, and program User

options, User Access Options and Area

Assignments.

Option [3]: Duress

Option [4]: Bypass

Option [5]: Arm Only

Option [6]: Stay and Instant Arm

Option [7]: Force Arm

Option [8]: OFF - Access keypad’s

partitions only

ON - Access any

partition assigned

to user

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Digiplex DGP2-641BL Instructions d'exploitation Page 12

Commentaires sur ces manuels