Digiplex DGP2-641BL Manuel d'installation télécharger pdf (Page 39)

Digiplex Modules Programming Guide - 39

Power Supply Module (DGP2-PS17)

Door Contact Module (DGP2-ZC1)

Refer to Module Connection Overview on page 30 for information on how to connect the Power Supply

Module’s PGM output (Figure 2). Before commencing with the connections, please read the General Warnings

listed on page 30.

The 12Vdc power supply output will automatically shut down if the current exceeds 1.1A.

A 40VA transformer is required when selecting the 850mA battery charge current. Using a 20VA

transformer with a battery charge current of 850mA may damage the system.

Improper connection of the transformer

may result in damage to the system.

For information on the

Power Supply Module’s

LEDs, refer to Module

LED Indications on

page 30.

Control Panel

(DGP-848/DGP-NE96

)

Caution:

Disconnect

battery before

replacing the

fuse.

For information on the

Addressable Door Contact’s

LEDs, refer to Module LED

Indications on page 30.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Pas de commentaire

Digiplex DGP2-641BL Manuel d'installation Page 39