Digiplex DGP2-641BL Manuel d'installation télécharger pdf (Page 34)

34 - Digiplex Modules Programming Guide

Motion Detector Modules (DGP2-50/60/70)

PCB Height Adjustment

DGP2-50/60/70 is designed for optimal performance at a

height of 2.1m (7ft), but can be installed lower or higher. After

you have installed the motion detector, ensure that the PCB

Height Markings match the installation height. The installation

height is measured from the ground to the base of the motion

detector's cover.

For example, if the motion detector is installed at a height of

2.1m (7ft), the PCB should then be adjusted to 2.1m (7ft). To

adjust the PCB height, remove the PCB screw and align the

PCB Height Tab with the desired height marking on the PCB.

Addressable High-Security

Motion Detectors

(DGP2-70)

Addressable Digital

Motion Detectors

(DGP2-50/60)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Pas de commentaire

Digiplex DGP2-641BL Manuel d'installation Page 34