Digiplex DGP-641 Spécifications télécharger pdf (Page 13)

12 Installer’s Guide

4.7 BEEP ON EXIT DELAY

Section 003: Option [2]

The keypad can beep once every second during the Exit Delay

Timer. During the final 10 seconds, it will beep more rapidly to

provide a final warning before the area is armed.

Option [2] OFF = Exit Delay beep disabled

Option [2] ON = Exit Delay beep enabled (default)

4.8 CHIME ON ZONE CLOSURE

Section 003: Option [4]

During the Chime Zone Time Period that the user sets, the keypad

can emit an intermittent beep whenever a zone with the Chime

feature enabled closes (see Digiplex User Manual for details on

Chime Zones). If the user does not set the Chime Zone Time Period

and this option is enabled, the Chime Zones will always beep upon

closure.

Option [4] OFF = Chime on Zone Closure disabled (default)

Option [4] ON = Chime on Zone Closure enabled

4.9 BEEP ON TROUBLE

Section 004: Options [1] to [4]

Potential troubles have been sorted into groups. With these options

enabled, the keypad will emit an intermittent beep tone whenever a

trouble condition from the Trouble Groups occurs in the system. The

intermittent beep will remain activated until the user enters the

Trouble Display or if the trouble is resolved. For a list of the troubles,

see the Digiplex Control Panel’s Reference and Installation Manual.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Pas de commentaire

Digiplex DGP-641 Spécifications Page 13