Digiplex EVO641R Manuel d'installation télécharger pdf (Page 4)

4 - Modules Programming Guide

Using the Memory Key

Download Contents of the Memory Key to the Grafica Keypad:

1) Insert the Memory Key onto the keypad’s connector (refer to Memory Key Connector on page 4).

2) To download the contents of the Memory Key, enter the keypad’s programming mode and enter section [100].

3) Once the keypad emits a confirmation beep, wait for a second confirmation beep and then remove the Memory Key.

Copy Contents of the Grafica Keypad to the Memory Key:

1) Insert the Memory Key onto the keypad’s connector (refer to Memory Key Connector on page 4). Ensure that the ‘write protect’ jumper

is on (refer to Memory Key below).

2) To copy the contents to the Memory Key, enter the keypad’s programming mode and enter section [110].

3) Once the keypad emits a confirmation beep, wait for a second confirmation beep and then remove the Memory Key. Remove the

Memory Key’s jumper if you do not wish to accidentally overwrite its contents.

Memory Key Connector

Memory Key

[100]

Download all from the Memory Key (Grafica keypad sections [001] to [006] and all user, zone, door and area labels) to

the Grafica keypad.

[110] Copy the Grafica keypad sections [001] to [006] and all user, zone, door and area labels to the Memory Key.

Memory Key

Jumper ON:

Can copy and

download contents.

Jumper OFF:

Cannot override the

contents of the memory

key.

1 2 3 4 5 6 7 8 9 ... 59 60

Pas de commentaire

Digiplex EVO641R Manuel d'installation Page 4