Digiplex EVO641R Manuel d'installation Page 40
- Page / 68
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Digiplex -EVO- - 40 - Programming Guide
Reporting Formats
For North American installations using either SIA or Contact ID reporting formats, enter *70 and then either P (4-second pause) or W (wait
for second dial tone) before the phone number in sections [3071] to [3074] to disable call-waiting.
System Event Call Direction
= Default setting
Section Description
[3070] ___ ___ ___ ___ R
EPORTING FORMATS FOR TELEPHONE NUMBERS 1 TO 4
Use the same format for each number. Only the pager format can be used with
other reporting formats.
For more information, refer to Automatic Report Code Programming on
page 50.
Section Data (Press [
ENTER] if less than 32 digits) Description
[3071] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__M
ONITORING STATION/PAGER TELEPHONE #1
[3072] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__M
ONITORING STATION/PAGER TELEPHONE #2
[3073] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__M
ONITORING STATION/PAGER TELEPHONE #3
[3074] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__M
ONITORING STATION/PAGER TELEPHONE #4
Special Telephone Number Keys
Function LCD Grafica Function LCD Grafica
[STAY]
[#]
(press key until desired
letter/symbol appears)
Clear [CLEAR] Left action key (Clear)
# [
FORCE] Delete [TRBL] —
Switch to Tone Dialing (T) [ARM] Delete from cursor to the end [ACC] —
Wait for second dial tone (W) [
DISARM] Insert space [MEM] —
4-second pause (P) [BYP] Dial 9 for outside line 9+[STAY] —
SECTION [3080]: System Troubles & Trouble Restores
SECTION [3081]: Special Reporting
Option
OFF ON
Option
OFF ON
[1] Call Telephone #1 N Disabled
Enabled
[1] Call Telephone #1 N Disabled
Enabled
[2] Call Telephone #2
Disabled
N Enabled [2] Call Telephone #2
Disabled
N Enabled
[3] Call Telephone #3
Disabled
N Enabled [3] Call Telephone #3
Disabled
N Enabled
[4] Call Telephone #4
Disabled
N Enabled [4] Call Telephone #4
Disabled
N Enabled
[5] Backup on Telephone #1
Disabled
N Enabled [5] Backup on Telephone #1
Disabled
N Enabled
[6] Backup on Telephone #2
Disabled
N Enabled [6] Backup on Telephone #2
Disabled
N Enabled
[7] Backup on Telephone #3
Disabled
N Enabled [7] Backup on Telephone #3
Disabled
N Enabled
[8] Backup on Telephone #4
Disabled
N Enabled [8] Backup on Telephone #4
Disabled
N Enabled
*
- Hardware Requirements 2
- Hardware Differences 2
- Table of Contents 3
- Things You Should Know 3
- Entering Programming Mode 3
- Serial Number List 4
- Zone Programming 9
- Zone Information 10
- Zone report codes 15
- Zone Labels 17
- Keyswitch Programming 19
- Programmable Outputs 21
- †: See page 27 25
- † 001 to 064 001 to 064 25
- † Not Used Not Used 25
- Input Speeds 28
- Installer Code Programming 28
- User Code Options 29
- Arming Report Codes 30
- Disarming Report Codes 30
- Access Control Sections 31
- Schedule Programming 32
- SECONDARY SCHEDULES 33
- Backup Schedules 34
- Programming Access Levels 34
- Holiday Programming 34
- Keypad Numbering 35
- Remote Control Programming 35
- Control Panel Settings 36
- System Options 36
- Dialer Options 38
- Other Options 38
- Communication Settings 39
- Reporting Formats 40
- VDMP3 Voice Module 41
- Partition Settings 42
- Partition Timers 43
- Partition Options 1 43
- Partition Panic Alarm Options 45
- Partition Bell Squawk Options 45
- Partition One-Touch Options 45
- Partition Special Options 46
- Special Arming Exit Delay 47
- No Movement Schedule 47
- Other Settings and Modes 49
- Software Reset 50
- Installer Function Keys 51
- Automatic Report Code List 51
- System Event 52
- Default SIA Report Code 52
- Contact ID Report Code List 53
- VDMP3 Installation Diagram 55
- Feature Activation (PGMs) 55
- N 12Hr clock 56
- N Disabled 56
- [018]: Beeping Assignment* 57
- Message Programming 58
- Using the Memory Key 59
- Memory Key (PMC-5) 59
- Combus Voltmeter 59
- BLK and Z1 terminals 60
- BLK and Z2 terminals 60
- Single Zone Inputs 61
- ATZ - Double Zone Inputs 61
- Connections 62
- Telephone Line Connections 63
- Built-in RTC 64
- PCB Layout 65
- Warranty 67
- Limitations of Alarm Systems 67
- Trouble Display 68
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Digiplex EVO641R
(32 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels